DC512C
logoti 2_0007_parker-short
DC512C
The DC512C is an analogue non-regenerative 2-quadrant DC drive having 4-32A output current and an isolated control circuit. This is suitable for single-axis or multi-axis low power applications that require speed or torque control of classic and permanent DC motors.
Specifications
Standards
- Fully isolated control circuits
- 110 V ... 415 V supply selection by jumpers
- CE marked and EMC compliant
- Multiple input speed and current setpoints
- Zero speed and drive healthy outputs
- Extremely linear control loops
- CE Marked to EN50178 (Safety, Low Voltage Directive)
- CE Marked to EN61800-3 (EMC Directive) with external filter
- NRTL Listed to US Standard UL508C
- NRTL listed to Canadian standard C22.2#14
Technical details
Supplz Voltage
Maximum output current
Overload
Ambient
Protection
Feedback
110-120VAC ± 10 %, 50-60 Hz ± 5%
220-240VAC ± 10 %, 50-60 Hz ± 5%
380-415VAC ± 10 %, 50-60 Hz ± 5%
4A / 8A / 16A / 32A
150% for 60 s
Temperature: 0-40°C
Altitude max 1000 m
IP00
- Tachogenerator
- Armature voltage feedback
Inputs/Outputs
Analog inputs
Analog outputs
Digital inputs
Digital outputs
Potentiometers
- Speed reference / auxiliary speed reference / tacho meter feedback
- Option - Current limit / - Minimum speed
- Speed / - Load / - Ramp / - Total reference / - Reference voltage ± 10V
– Run (Active) / – Stall Enable
– Zero Speed / – Health
- Maximum speed
- Minimum speed
- Acceleration time (1-40s)
- Deceleration time (1-40s)
- Stability
- I.R. compensation