DC590
The DC590+ DC drive family is included in Parker's Integrator Series, which includes AC frequency inverters (AC690+) in addition to the DC590+. The DC 590+ is a high performance DC drive that meets the requirements of even the most complex applications of DC motors.
- Programmable 6901 keyboard
- Large communication selection (Profibus-DP, DeviceNet, CANopen, LINK, LonWorks, EI Bisynch / RS422 / RS485, Modbus RTU)
- Speed Feedback options (analog tachometer, encoder,…)
- EMC filter
- Chokes for the European or North American market
- Phase filters for long motor conductors
- Easy assembly and programming
- Removable keyboard
- Compact design
- Motor thermistor input
- Open-loop control
- Winder control - loadcell / dancer
- Mathematical functions
- Integrated controller functions
The DC590+ series meets the following standards when installed in accordance with the relevant product manual:
- CE marked to EN50178 (Saftey, Low Voltage Directive)
- EN61800-3 (EMC Directive) with integral filters
- External supply capacitors are required up to 110 A for compliance.
- Supply Voltage 220...500 V as standard
- CE marked
- UL an cUL approved up to 830 A
Technical details
3x 110-220VAC ± 10 %, 50-60 Hz ± 5%
3x 220-500VAC ± 10 %, 50-60 Hz ± 5%
3 x 500-690VAC ± 10 %, 50-60 Hz ± 5%
15 – 2700A (15 – 165A for DRV version)
1 – 1500 kW
Current | Tachometer | Encoder
RS232 / RS485 | CANopen | ControlNet | DeviceNet | Profibus | Ethernet TCP / IP | Link Communications | Modbus
Regenerative | Non-regenerative | Stack Controller
CE (EMC & LVD) | Overvoltage Category III | Pollution Degree II | UL Listed | cUL Listed
- for DC drives 15 – 165A: 0-45°C
- for DC drives 180 – 270A: 0-35°C
- for DC drives 380 – 2700A: 0-40°C
- Up to 500m altitude (1% power loss at additional 200m up to a maximum of 5000m)
- for DC drives from 15 to 270A: 150% for 30 s / 200% for 10 s
- for DC drives over 270A : see the catalog or manual
- 590+ - 4 Quadrant Regeneration: Two three-phase SCR bridges
- 591+ - 2 Quadrant Non-Regenerative: Single SCR Bridge
Inputs/Outputs
- (5 Total - 1 x 12 bit plus sign, 4 x 10 bit plus sign)
- 1 - Speed demand setpoint (-10/0/+10 V)
- 4 - Configurable
- (3 Total - 10 bit)1
- Armature current output (-10/0/+10 V or 0-10 V)
- 2 - Configurable
- (9 Total - 24 V, max 15 mA)
- 1 - Program stop1
- Coast stop1
- External stop1
- Start/Run 5
- Configurable
- 3 Total - 24 V (max 30 V) 100 mA
- 3 - Configurable
- 1x- +10VDC
- 1x -10VDC
- 1x +24VDC