One-Phase 230V

• 0,4 kW
• 0,75 kW
• 1,5 kW
• 2,2 kW

Three-Phase 3x 200…230V

0 – 400 Hz

V/F (linear, square, adjustable)

Sensorless vector

• 0,01 Hz (digital)
• 0,06 Hz/60 Hz (analog)

• 0,01 % from the maximum output frequency (digital)
• 0,1% (analog)

• 150% for 1 minuto
• 200% for 30s

• manual (0-15%)
• automatically

Operator control: keyboard, terminal, communications
Frequency Tuning: Analog (0-10V / 4-20mA),
Digital (Keyboard), RS485 Communication (ModBus-RTU)
Start signal: forward / backward
Multi-step operation: up to 8 speeds (multifunction terminal)
Multi-step Acceleration / Deceleration: 0.1 - 6000s, maximum of 8 different types.
Choice of accelerator type: linear, U and S. Emergency stop:
Interrupt the output of the frequency inverter Jog: Jog function Error reset: when the protection function is activated

Performance display and fault display: frequency detection, overload alarm, deadlock, overvoltage, under voltage, overheating, operation, shutdown, constant speed, speed search, output errors (relay and open collector output)

Indicator: Selectable from one of the following: output frequency, current, voltage, DC voltage

Working functions: DC braking, frequency limits, frequency hopping, other function, slip compensation, anti-reverse operation, automatic restart, PID control.

Options: overvoltage, under voltage, overcurrent, drive overheating, motor overheating, phase loss, faulty connection, overload, internal device failure, loss of speed command, hardware failure, communication error, CPU error
Alarms: deadlock, overload Temporary
Power Loss: Less than 15 ms - continues; more than 15 ms automatic restart

• output frequency
• flow
• tension
• frequency set
• speed
• DC voltage
• last 5 errors

Operating temperature: -10 - 50 ° C
Storage temperature: -20 - 65 ° C
Humidity: 90% maximum, non-condensing
Altitude and vibration: max. 1000m, max 5.9m / s2 (0.6g)
Working atmosphere: free of corrosive or flammable gases, oil mist and dust Pressure: 70-106 kPa